Humidity Temperature-泰纳电子科技有限公司

Home>
Products>
Humidity Temperature

TES-5322
PM2.5 Air Quality Monitor
- Monitoring air pollutant source from dust, petrochemical industry, steel-making plant, thermal power plant, restaurant, smoke, burning plants, driving automobiles.
- The meter is a real-time air quality monitor instrument used to monitor the concentration of PM2.5, humidity and temperature in the indoor environment.
- Fine particulate matter (PM2.5) measurement.
- Mix gases (VOCs-Volatile organic compounds) 　　　measurement.
  High sensitivity to H2, C2H5OH, C4H10, CO and CH4. (5322)
- Temperature and Humidity measurements.
- Health index (0 ~ 9) detection and alarm.
- PM2.5 time weighted average reading.
- VOCs time weighted average reading. (5322)
- Data hold and MAX/MIN with time stamp function.
- Six-color LED indication Air Quality Index Category.
- Preset warning point of buzzer alarm, LED and alarm output.
- Manual data memory and read function.
- Auto data logger function. (5322)
- USB Interface. (5322)
TES-2900
TES-2900 Ture Rms Multimeter
- You can get an accurate ground resistance measurement in the presence of offset voltage.
- Features
- Smart ohm for ground resistance measurement.
- Variable – frequency drive (VFD) V & Hz measurement.
- Lo – Z voltage measurement to drain ghost voltages.
- Check 3 phase sequence.
- Data hold, Auto hold & Peak hold mode.
- Max/Min/Avg record mode.
- Relative value display.
- Frequecy count. (Auto-Range)
- Temperature type K, J measurement.
- Capacitance measurement.
- Data memory & read function.
TES-1339P
TES-1339P Data Logger Light Quantum Meter
1. Autoranging 5 steps and conversion to Hmole/m2/s (PPFD: Photosynthetic Photon Flux Density).
2. Integral illuminance measurement 3nd conversion to mole/m2/d (Daily light integral).
3. Luminous intensity measurement.
4. Point - average function.
5. Spectral correction factor function, (include LED)
6. Time-hold function.
7. Dual Display, 4 digit LCD reading.
8. Spectral Sensitivity close to CIE photopic Curve.
9. Accurate and Instant response.
10. Data Hold function.
11. Data memory and read function.
12. Reference value stored for relative or percentage deviation measurement.
13. Ripple measurement for STRAY + LIGHT function.
14. Comparator function.
15. Auto power off function.
16. Backlight display function.
17. Auto datalogging & USB interface.
TES-5110
Particle Counter
- Six particle size channels : 0.3μm, 0.5μm, 1.0μm, 2.0μm, 5.0μm, 10μm
- Integrated temperature / humidity sensor (no need for external add-on).
- Flow rate 2.83 L/minute (0.1 CF / minute).
- Rechargeable battery provides up to 4 hours of continuous operation (charge time 2.5 hours).
- Buffer function allows storing and redisplay of up to 500 measurement data sets.
- SD storage device.
TES-5321
PM2.5 Air Quality Monitor
- Monitoring air pollutant source from dust, petrochemical industry, steel-making plant, thermal power plant, restaurant, smoke, burning plants, driving automobiles.
- The meter is a real-time air quality monitor instrument used to monitor the concentration of PM2.5, humidity and temperature in the indoor environment.
- Fine particulate matter (PM2.5) measurement.
- Mix gases (VOCs-Volatile organic compounds) 　　　measurement.
  High sensitivity to H2, C2H5OH, C4H10, CO and CH4. (5322)
- Temperature and Humidity measurements.
- Health index (0 ~ 9) detection and alarm.
- PM2.5 time weighted average reading.
- VOCs time weighted average reading. (5322)
- Data hold and MAX/MIN with time stamp function.
- Six-color LED indication Air Quality Index Category.
- Preset warning point of buzzer alarm, LED and alarm output.
- Manual data memory and read function.
- Auto data logger function. (5322)
- USB Interface. (5322)

12 3 >

TES-5322

TES-2900

TES-1339P

TES-5110

TES-5321