AC/DC Clamp -泰纳电子科技有限公司
-
PROVA-2009
AC/DC True RMS Watt Clamp
- AC+DC 1200KW
- DC/AC 2000A & ANALOG OUTPUT
- Cable F 55mm
- True RMS
- Temperature ( ℃ or ℉ )
- 0.1 ℃ / ℉ Resolution
-
cm-02/04
Clamp Meter/Automotive Clamp
- DC/AC 0.01A Resolution
- AC/DC 0.01A~200A
- 23mm Jaw Diameter
- One Touch Zero
- Temperature and Capacitance
- Auto Range V、 W 、Hz、℃、
- 3 3/4 Digits (4000 Counts)
- 0~9999 RPM(CM-04)
-
PROVA-19/21/23
Power Harmonics and Leakage Tester
- MODEL PROVA 19, 21, 23
- True RMS value (V and A)
- Leakage Current Measurement at 10 μ A Resolution
- Harmonic Analysis (V and A) to the 99 th Order
- Better Understanding of High Frequency Harmonic Analysis (up to 5/6 KHz)
- Non-interrupted Harmonic Analysis
- Analysis of Total Harmonic Distortion (THD-F)
- Analysis of Crest Factor (C.F.)
- Fast Peak Function (33 μ s and 39 μ s)
- Programmable CT Ratio (1 to 250)
Model 21(50A) and 23(100A)
- W, KW, H.P.
- VA, KVA, VAR, KVAR
- PF, Phase Angle ( Φ )
- Energy (mWH, WH, KWH)
- Analysis of Standby Power Consumption
- Balanced 3 Φ Power Quality
- Balanced 3 Φ Sequence
-
TES-3079K
Power Clamp Meter
- HVAC Application：
- Check current draw in motors and compressors.
- Use MAX/MIN/Recording in the temperature mode to assess efficiency.
- Test run/start capacitors.
- Confirm low voltage control signals.
- Measure flame safeguard device current draw.
- Confirm power sources.
- Analyze temperature and voltage or current data with the aid of the time stamp.
- Insulation test up to 100M Ω.
Electrical Application：
- Check for energized circuits and balance loads.
- 1 Φ /3 Φ (3P3W/3P4W)Power analyzer.
- Evaluate electrical contacts.
- Capture motor in-rush current readings.
- Determine peak power demand periods.
- Verify line voltage stability.
- Monitor motors and other loads for excess heat.
- Check motor run/start capacitor values.
-
TES-3063/3064
Power AC/DC Clamp Meter
- 1 Φ 2W, 1 Φ 3W,3 Φ 3W,3 Φ 4W
- RS-232 interface to talk with PC
- 4 digits with dual display LCD
- Amp / Voltage f requency measurement
- Dual display KW+PF , KVA+PF , V+A
- 4000 continuity point data logger , 25 point manual data logger
- True power / apparent power / power factor measurement
- True RMS. V , A , W , cap , lnd , phase indicator
- MIN / MAX measurement
- Peak hold detector
- Dual display A+Hz , V+Hz
EN61010-1
600V Installation CAT III
Pollution Degree 2
