- New Products
- Humidity Temperature
- Calibrator
- Harmonic Clamp Meter
- Digital earth leakag
- Thermometer
- Sound analyzer
- Infrared Thermometer
- Anemometer
- Sound Level Meter
- Lan Cable Tester
- Digital multimeter
- AC/DC Clamp
- Power Supply
- Power Clamp Meter
- Tachomet
- CO2 Tester
- Conductivity meter
- Battery Impedance Te
- PH Meter
- Insulation tester
- Light Meter
- Milli / Micro Ohm Me
- Color Meter
- Heat Stress Monitor
- Flexible Clamp Meter
- EMF Tester
- Luminous Flux Meter
- PV Analyzer
- Luminance Meter
- counter
- LOOP / PSC Tester
- Water quality analyz
- TRMS Power Analyzer
- 3P4W POWER ANALYZER
- Portable Thermal Pri
- Solar Power Meter
- Digital Earth Tester
- Dust meter
- accessories
- Home>
- Products>
- Thermometer >
- Thermometer
TES-1310
Thermometer
Product Features
- Switchable Resolution 0.1° /1.0 °
- Single/Dual Channels with Differential Measurements
- Data Hold Function
Thermometer introduction
- Switchable Resolution 0.1° /1.0 °
- Single/Dual Channels with Differential Measurements
- Data Hold Function
Measuring Range | -50 ℃ to 1300 ℃; -50 ℉ to 1999 ℉ |
Sensor | K Type thermocouple |
Input | Single |
Resolution | 50 ℃ to 199.9 ℃...0.1 ℃ -50 ℉ to 199.9 ℉ ...0.1 ℉ (Others-1 ℃/1℉ ) |
Accuracy | 50 ℃ to 199.9℃...0.2% rdg + 1 ℃ -50 ℉ to 199.9 ℉ ...0.2% rdg + 1 ℉ -50 ℃ to 1000 ℃... 0.3% rdg + 1 ℃ -50 ℉ to 1999 ℉ . ..0.3% rdg + 2℉ 1000 ℃ to 1300 ℃..0.5% rdg + 1 ℃ (apply to mainframe only at 23℃±5 ℃) |
Function | H Data Hold & Display ℃/ ℉ selection 0.1 o /1 o resolution selection T1 & T2 dual points display T1 - T2 differential measurement 3-1/2 digit LCD |
Overrange | 1------ |
Low Battery | BT |
Input Protection | 60V DC or 24 Vrms AC maximum input voltage on any combination of input Connector. |
Sampling Rate | 2.5 times/sec. |
Operating Condition | 0 ℃ to 50 ℃ (32 ℉ to 122 ℉ ), 0 to 90% R.H. (0 to 35 ℃) |
Power Source | one 9V battery |
Size | 135mm(L)x72mm(W)x31mm(H) |
Weight | 157g |
Accessorie | Battery & Instruction Manual |
* OPTIONAL TEMPERATURE PROBES | Model Range(Type K(CA) THERMOCOUPLE) TP-K01 Bead -50℃ to 200 ℃/-58 ℉ to 392 ℉ General Purpose TP-K02 Immersion -50 ℃ to 1000 ℃/-58 ℉ to 1832 ℉ Liquid or gels. TP-K03 Surface -50 ℃ to 750 ℃/-58℉ to 1382 ℉ |
上一个产品:噪音剂量计下一个产品:无