- New Products
- Humidity Temperature
- Calibrator
- Harmonic Clamp Meter
- Digital earth leakag
- Thermometer
- Sound analyzer
- Infrared Thermometer
- Anemometer
- Sound Level Meter
- Lan Cable Tester
- Digital multimeter
- AC/DC Clamp
- Power Supply
- Power Clamp Meter
- Tachomet
- CO2 Tester
- Conductivity meter
- Battery Impedance Te
- PH Meter
- Insulation tester
- Light Meter
- Milli / Micro Ohm Me
- Color Meter
- Heat Stress Monitor
- Flexible Clamp Meter
- EMF Tester
- Luminous Flux Meter
- PV Analyzer
- Luminance Meter
- counter
- LOOP / PSC Tester
- Water quality analyz
- TRMS Power Analyzer
- 3P4W POWER ANALYZER
- Portable Thermal Pri
- Solar Power Meter
- Digital Earth Tester
- Dust meter
- accessories
- Home>
- Products>
- Lan Cable Tester >
- CAT-5 Lan Cable Tester
TES-45
CAT-5 Lan Cable Tester
Product Features
- Test a wide range of UTP cables such as 10Base T , 100Base Tx , 10Base 2 (Coax), 356A , TIA-568A , TIA-568B, etc.
- Can tests for wiring faults such as open, short , reversed , crossed and split wires.
- Can identify up to 4 different cables at one end by provided remote identifiers.
- Double digital 14-segment LED and 4 pair LEDs clearly display the fault status.
- Provided over voltage (max.56V) protection to prevent damage frommiss connecting to live circuit of networking.
- Simple and effective use.
- Auto power off
CAT-5 Lan Cable Tester introduction
- Test a wide range of UTP cables such as 10Base T , 100Base Tx , 10Base 2 (Coax), 356A , TIA-568A , TIA-568B, etc.
- Can tests for wiring faults such as open, short , reversed , crossed and split wires.
- Can identify up to 4 different cables at one end by provided remote identifiers.
- Double digital 14-segment LED and 4 pair LEDs clearly display the fault status.
- Provided over voltage (max.56V) protection to prevent damage frommiss connecting to live circuit of networking.
- Simple and effective use.
- Auto power off
Display/LEDs | Double digital 14-segment LED Four FAIL (red) LEDs Four Pass (green) LEDs |
Connector | RJ45, BNC |
Cable pairs tested | 1/2 , 3/6 , 4/5 , 7/8 |
Faults status | Open , Short , Reversed , Crossed , Split and Low Battery |
Test cable length | Minimum : 1.2M (4ft) , Maximum : 150M (492ft) |
Power | 9Volt battery |
Size | 170 x 52 x 38mm |
Weight | Approx. 180g |
Environment Conditions | Operating : 0 ℃ to +50 ℃ Storage : -20 ℃ to +60 ℃ |
Accessories | Instruction manual, One patch cable (RJ-45 to RJ-45,30cm long) & One remote identifier #1(Optional for A #2, #3 & #4 ) (Optional for B #5, #6, #7 & #8) |