- New Products
- Humidity Temperature
- Calibrator
- Harmonic Clamp Meter
- Digital earth leakag
- Thermometer
- Sound analyzer
- Infrared Thermometer
- Anemometer
- Sound Level Meter
- Lan Cable Tester
- Digital multimeter
- AC/DC Clamp
- Power Supply
- Power Clamp Meter
- Tachomet
- CO2 Tester
- Conductivity meter
- Battery Impedance Te
- PH Meter
- Insulation tester
- Light Meter
- Milli / Micro Ohm Me
- Color Meter
- Heat Stress Monitor
- Flexible Clamp Meter
- EMF Tester
- Luminous Flux Meter
- PV Analyzer
- Luminance Meter
- counter
- LOOP / PSC Tester
- Water quality analyz
- TRMS Power Analyzer
- 3P4W POWER ANALYZER
- Portable Thermal Pri
- Solar Power Meter
- Digital Earth Tester
- Dust meter
- accessories
-
PROVA-2009
AC/DC True RMS Watt Clamp- AC+DC 1200KW
- DC/AC 2000A & ANALOG OUTPUT
- Cable F 55mm
- True RMS
- Temperature ( ℃ or ℉ )
- 0.1 ℃ / ℉ Resolution
-
cm-02/04
Clamp Meter/Automotive Clamp- DC/AC 0.01A Resolution
- AC/DC 0.01A~200A
- 23mm Jaw Diameter
- One Touch Zero
- Temperature and Capacitance
- Auto Range V、 W 、Hz、℃、
- 3 3/4 Digits (4000 Counts)
- 0~9999 RPM(CM-04)
-
TES-133
Luminous Flux Meter- 4-digit LCD reading.
- Spectral Sensitivity close to CIE photopic Curve.
- Auto ranging from 0.05 to 7000 lumens.
- Accurate and Instant response.
- Data Hold function.
- Auto data hold function.
- Data memory and read function.
- Maximum / Minimum function.
- Zero function.
- Ratio function.
- Sort function.
- Comparator function.
- Best for measuring : LEDs, Small lamps,
Fiber illuminators. - RS232 Interface.
- Easy to use.
- Adapters kit:2/3/4/5/8/10/24 m/m
-
PROVA-19/21/23
Power Harmonics and Leakage Tester- MODEL PROVA 19, 21, 23
- True RMS value (V and A)
- Leakage Current Measurement at 10 μ A Resolution
- Harmonic Analysis (V and A) to the 99 th Order
- Better Understanding of High Frequency Harmonic Analysis (up to 5/6 KHz)
- Non-interrupted Harmonic Analysis
- Analysis of Total Harmonic Distortion (THD-F)
- Analysis of Crest Factor (C.F.)
- Fast Peak Function (33 μ s and 39 μ s)
- Programmable CT Ratio (1 to 250)
Model 21(50A) and 23(100A) - W, KW, H.P.
- VA, KVA, VAR, KVAR
- PF, Phase Angle ( Φ )
- Energy (mWH, WH, KWH)
- Analysis of Standby Power Consumption
- Balanced 3 Φ Power Quality
- Balanced 3 Φ Sequence
-
PROVA-6603+6605
Flexible Clamp MeterTES-6603/6605
Specification(23‘C+5“CPlease refer to the manual to understand the latest and more detailed specifications)
AC WattAC Watt(50 or 60 Hz,PF 0.5 to 1,CT=7)
Model 6603(0 to 600A),Model 6605(0 to 1500A)AC currentAC Current(50 0r 60 Hz,True RMS)