- New Products
- Humidity Temperature
- Calibrator
- Harmonic Clamp Meter
- Digital earth leakag
- Thermometer
- Sound analyzer
- Infrared Thermometer
- Anemometer
- Sound Level Meter
- Lan Cable Tester
- Digital multimeter
- AC/DC Clamp
- Power Supply
- Power Clamp Meter
- Tachomet
- CO2 Tester
- Conductivity meter
- Battery Impedance Te
- PH Meter
- Insulation tester
- Light Meter
- Milli / Micro Ohm Me
- Color Meter
- Heat Stress Monitor
- Flexible Clamp Meter
- EMF Tester
- Luminous Flux Meter
- PV Analyzer
- Luminance Meter
- counter
- LOOP / PSC Tester
- Water quality analyz
- TRMS Power Analyzer
- 3P4W POWER ANALYZER
- Portable Thermal Pri
- Solar Power Meter
- Digital Earth Tester
- Dust meter
- accessories
-
TES-1358C
Sound Analyzer Real Time 1/1 & 1/3 Octave band Analysis- Superb high – contrast backlit TFT – LCD color display
- Real-time 1/1-Octave and 1/3-Octave analysis
- 4GB microSD Memory Card
- Data transfer using USB
- Real time clock with calendar
- AC and DC outputs
-
TES-1358E
Sound Analyzer- Compliant with IEC 61672-1 class 1 standard.
- Real-time 1/1-Octave and 1/3-Octave analysis.
- Measurement can be started by internal or external trigger.
- Comparator output to trigger external devices.
- Super high – contrast backlight TFT – LCD color display.
- Dynamic range of 90dB.
- AC and DC outputs.
- Data transfer using USB.
- micro SD CARD 4GB.
-
TES-1900
DIGITAL RCD TESTER• Custom microprocessor controlled for
highest accuracy and reliability.
• 3 LED 's for checking correct wiring status.
• 0 and 180 degree phase angle switch
permits quick tests and consistent readings.
• Digital read out of tripping time.
• Large custom digital display readout
on all models.
• Visual indication of reversed phase and
neutral wring at socket.
• Resilient case made from modern plastics
to take everyday knock and brings. -
TES-3079K
Power Clamp Meter- HVAC Application:
- Check current draw in motors and compressors.
- Use MAX/MIN/Recording in the temperature mode to assess efficiency.
- Test run/start capacitors.
- Confirm low voltage control signals.
- Measure flame safeguard device current draw.
- Confirm power sources.
- Analyze temperature and voltage or current data with the aid of the time stamp.
- Insulation test up to 100M Ω.
Electrical Application: - Check for energized circuits and balance loads.
- 1 Φ /3 Φ (3P3W/3P4W)Power analyzer.
- Evaluate electrical contacts.
- Capture motor in-rush current readings.
- Determine peak power demand periods.
- Verify line voltage stability.
- Monitor motors and other loads for excess heat.
- Check motor run/start capacitor values.
-
PROVA-801+803
Digital Multi-Meter- 60,000 count and dual input channels
- 0.04% DC basic accuracy and 0.2% AC basic accuracy
- Bandwidth of 10KHz(max)
- Fast ACV, ACA response
- Dual channels measurement similar to a dual channels DSO(V+V,V+A)
- Hz + duty cycle dual display
- Capacitance measurement
- Standalone data logging of 10,708 records for both channels(803)
- RS-232C interface
- Application Software (Option)
- 1/7 the cost