TES-2730
Datalogger Multimeter
Product Features
- DMM talks with P.C. via RS-232 interface
- Data Logger function
- Direct input of V, A, Ohm, Hz, Cx & o C/ o F
without any further singnal modification
Datalogger Multimeter introduction
- DMM talks with P.C. via RS-232 interface
- Data Logger function
- Direct input of V, A, Ohm, Hz, Cx & o C/ o F
without any further singnal modification
Range
|
200m/2/20/200/750(AC)/1000V(DC)
Accuracy: DC - ( 0.5% rdg + 1 dgt )
AC - ( 1.0% rdg + 5 dgts ) |
Resolution
|
0.1m |
Input Impedance
|
10MΩ |
Overload Protection
|
600Vrms |
|
Range |
200/2K/20K/200K/2M/20M |
Accuracy |
0.8% rdg + 2 dgts |
Resolution |
0.1 Ω |
Overload Protection |
600Vrms |
Max. Open Circuit Voltage |
3.2V |
Max. Allowable Applied Voltage
|
500Vrms |
|
Resolution |
1mV |
Accuracy |
2% rdg +2 dgts |
Max. Test Current |
1.0mA |
Max. Open Circuit Voltage |
3.2V |
|
Range |
2000p/200n/2 m /20 m F |
Accuracy |
3% rdg + 10 dgts |
Test Frequency |
400Hz |
Data logger function for TES-2732 only |
|
Operation Resistance |
Below 30 Ω |
Max. Open Circuit Voltage |
3.2V |
|
Test Range
|
10Hz to 20MHz (Auto Range) |
Range |
2K/20K/200K/2M/20MHz |
Resolution |
1 Hz |
Accuracy |
0.5% rdg + 2 dgts |
Input Sensitivity |
100mV |
Max. Allowable Applied Voltage
|
600Vrms. |
|
Range |
200 m /2m/20m/200m/20A (AC/DC) |
Accuracy |
DC - ( 1.0% rdg + 1dgt )
AC - ( 1.2% rdg + 3dgts ) |
Resolution |
0.1 μ A |
Burden Voltage |
0.35V |
Overload Protection
|
0.5A/250V Fast Blow Fuse & Diode 20A/380V |
|
Size & Weight |
180mm(L) x 82mm(W) x 38mm(H) & 365g |
Accessories |
Test leads, Spare Fuse, Battery,
Operation Instruction,
Optional rubber holster.
Connecting Cable & Software
disc for TES-2730/2732 |
|
Range |
-50 ℃ to 1370 ℃
-50 ℉ to 1999 ℉ |
Resolution |
0.1 ℃& 0.1 ℉ |
Sensor |
"K" type |
|
Display:
3-1/2 Digital LCD Display
Maximum Reading 1999
Sampling Rate: 2.5 readings per second
Operation/Storage Condition:
0 ℃ to 40 ℃< 80% R.H.
-10 ℃ to 60 ℃< 70% R.H.
Power Source: one 9V Battery
|
|