- New Products
- Humidity Temperature
- Calibrator
- Harmonic Clamp Meter
- Digital earth leakag
- Thermometer
- Sound analyzer
- Infrared Thermometer
- Anemometer
- Sound Level Meter
- Lan Cable Tester
- Digital multimeter
- AC/DC Clamp
- Power Supply
- Power Clamp Meter
- Tachomet
- CO2 Tester
- Conductivity meter
- Battery Impedance Te
- PH Meter
- Insulation tester
- Light Meter
- Milli / Micro Ohm Me
- Color Meter
- Heat Stress Monitor
- Flexible Clamp Meter
- EMF Tester
- Luminous Flux Meter
- PV Analyzer
- Luminance Meter
- counter
- LOOP / PSC Tester
- Water quality analyz
- TRMS Power Analyzer
- 3P4W POWER ANALYZER
- Portable Thermal Pri
- Solar Power Meter
- Digital Earth Tester
- Dust meter
- accessories
- Home>
- Products>
- Lan Cable Tester >
- CAT-5 Lan Cable Tester
TES-46
CAT-5 Lan Cable Tester
Product Features
- Tests : UTP. FTP. Coax cables, two, three, or four wire pairs in twisted pair cables and test
all category UTP cables and hardware. - Verify end-to-end connectivity per EIA/TIA 568 wiring standard.
- Detects wiring problems : Opens, Shorts, miswires (Crossed, Reversed, Split pair).
- Locates wiring/connection errors (distance to the open or shout)
- Measures cable length
- Easy to use only : One button to select the test and two lines characters LCD display.
- Low battery, Auto power off, long battery life (60 hours continuous)
CAT-5 Lan Cable Tester introduction
- Tests : UTP. FTP. Coax cables, two, three, or four wire pairs in twisted pair cables and test
all category UTP cables and hardware. - Verify end-to-end connectivity per EIA/TIA 568 wiring standard.
- Detects wiring problems : Opens, Shorts, miswires (Crossed, Reversed, Split pair).
- Locates wiring/connection errors (distance to the open or shout)
- Measures cable length
- Easy to use only : One button to select the test and two lines characters LCD display.
- Low battery, Auto power off, long battery life (60 hours continuous)
Display | Two lines characters LCD display (16 characters each) |
Connector | RJ45 and BNC |
Category | CAT5 |
Faults Status | Opens, Shorts, Reversed, Crossed, Split Pair. |
Test Type | TEST provides a pass / fail report on the cable under test. In case a failure has been detected, the display offers additional diagnostic information. LENGTH provides the length of each pair (in case a twisted pair cable is being tested). WIRE MAP provides the detail wiring for the cable. |
Cable Length | Range 2 to 999 ft or 1.0 to 350 m. Resolution 1 ft or 0.5 m. Accuracy 5% + 3 ft or 5% + 1 m |
Power | 6 pcs 1.5V size AAA alkaline battery. |
Input Protection | The inputs withstand telephone ringing and loop voltages. |
Size / Weight | 152 mm x 72 mm x 35 mm / Approx. 360 g |
Environment Conditions | Operating : 0 ℃ to +50 ℃ , Storage : -20 ℃ to + 60 ℃ |
Accessories | Instruction manual , Carry case , One UTP Category 5 patch cable, One RJ45F - RJ45F female coupler, Cable identifier #1 for the verification of the wire map. |